Two Waves and Three Waves Highway Guardrail Roll Forming Machine
I.Basic machine parameters
- Mechanical properties and specifications of raw materials
Material: Q345B galvanized sheet
Thickness: 2.5～3.0mm
Width: 450-476mm
Weight: 65KG
Specifications of products
Product: by product drawing
Product width: 310mm ± 5mm
Product height: 81mm ± 5mm
Product specifications
Forming method: Cold roll forming
Production speed: ≤10m / min
Feeding direction: left feed
Main voltage: 380V, 50Hz
Unit total power: about 20.7KW
Drive shaft bearing: 6026
Turbo lift: SWL10-3 / 23-FU3
Main drive motor: YVP180M-4-15
Reducer: ZQ500-48.57
Wallboard material: A3
Shaft material: 40
Mold material: Gcr15
II, Overview of equipment structure
The equipment frame is processed by A3 steel plate, after aging treatment, 3-roller structure, 1 upper and 2 lower, the lower roller adopts a fixed structure, the upper roller adopts slider movement adjustment, and 3 sets of turbine box drive are driven by the motor to adjust the upper and lower The turbine box is connected by a connecting rod to ensure the synchronization of 3 sets of boxes, and the 3 independent wall plates are connected by a shaft to ensure the parallelism of the whole machine. The diameter of the roller shaft is 110mm. There are two sets of molds on the left and right, one for the inner arc and one for the outer arc, and a set of 15KW main motor. It is driven by a ZQ500 reducer, which drives the left and right lower shafts through gears.The gear module is 10m, one for each left and right.The product is processed through the operation console.
III, Equipment configuration checklist
| No | Part Name | Quantity |
| 1 | Forming mould | One set of molds on each side |
| 2 | 15KW drive motor | 1Set |
| 3 | Forming mold shaft | 3Sets |
| 4 | Turbo lift | 3Sets |
| 5 | Lifting drive motor | 1Set |
| 6 | ZQ500 reducer | 1Set |
| 7 | Electrical console | 1Set |
| 8 | Equipment anchor bolt | 1Set |
Product Tags:
|
|
Two Waves And Three Waves Highway Guardrail Roll Forming Machine Images
|
